How to Flash the Latest Android Based on Qualcomm Driver 9008 QDLoader

How to Flash the Latest Android Based on Qualcomm Driver 9008 QDLoader

Qualcomm, dubbed the mobile platform, now dominates many phones that have Qualcomm Snapdragon processors. There are many ways to use Qualcomm-based phones, Qfil is one of them. This software is used to send cellphone firmware from the computer to the mobile memory system  which detects the QDLoader 9008 driver. QDLoader 9008 is common in damaged Androids such as Brick, Bootloop and other damage that causes Android to not be able to reboot as usual. Actually Android that is not broken even can detected QDLoader 9008 if you press a certain button or touch Test Point at a certain point on the Android machine and make Android read by the driver computer QDLoader 9008. Before doing flash, you need to prepare equipment such as firmware, drivers, flash software like Qfil, Miracle Box and others that support flash Qualcomm cipsets. You can get firmware and free download at babuludarat.com complete with flash and the type of detail of the firmware.

Flash materials

• Computers or Laptops make sure when walking does not turn off the lights that use Kompuer.
• 4 Color data cable (type C).
• The Qualcomm driver installs correctly depending on Windows if Windows X64 bit installs the X64 as well as using X32 bit.
• Qfil software or the like that supports Qualcomm cipsets.
• Firmware is a file file that contains the system which will be flashing on Android in a dead state. 
• Stock Rom is a file that contains an Android system that will use it in CWM, Recovery and adb sideload, which distinguishes Firmware and stock ROM on babuludarat.com.

Tutorial

1. Install Qualcomm drivers according to your computer or laptop to complete.

2. Run the Qfil Software that has been installed, start on Computer or Laptop if it doesn't meet, please go to the installation folder.

3. Extract the Firmware correctly and make sure there is no notification Corrup.

4. Open Qfil Software Browse the Select Programmer in the firmware folder that was extracted earlier. Select Flatbuild File prog_emmc_firehose_ (according to Mobile) with the .mbn extension that is available in the firmware that you extracted.

5. Continue to Load XML contents with rawprogram_unsparse.xml and patch patch0.xml.

6. So according to the image above the contents correctly make sure there are no wrong files in the placement.

7. Insert Android into bootloader mode every Android has a different way of entering the bootloader, make sure you know how to enter your Android bootloader so that the port is detected by 9008 drivers.

8. Here it is if all the files have been filled and the port is connected.

9. If you have removed everything you need in Qfil and you need to click Download at the bottom of the blue Load XML.

10. If you have finished removing Android from the data cable, unplug the battery from Android and reinstall it and press power to turn it on.

11. If you have a battery that can hold power for up to 20 seconds and Android will definitely turn on.

NOTE

After Android has been flash and won't turn on it may be a Firmware type error and MMC can also be damaged if all Firmware has been tried. That's him how to use Qualcomm 9008 Android Flash. Hopefully this post can make friends more careful in doing Android flash and not as bad as doing Android Flash at home.

Share this post

Berlangganan update artikel terbaru via email: